Are you a dealer? Click Here
Hover Over an Option
To get a detailed description of each category and it's available options, to help you make the correct selection.
Retain Steering Wheel Controls
Keep your factory steering wheel controls with Metra's ASWC-1. Easy to install with an aftermarket radio, easy to program with our auto detect feature.
Replace Factory Radio
Remove that featureless factory radio and install an aftermarket radio with Axxess's radio replacement interfaces and harnesses.
Add Remote Start
Cut down in installation time with Axxess's remote start vehicle specific harnesses.
Add Cameras to Factory Radio
Stay aware of your surroundings and improve safety by adding cameras to your existing factory screen.
Add Amp to Factory Radio
Get the sound quality you're looking for by adding aftermarket amplifiers to your factory radio with Axxess's Add-n-amp option.
Device Connection
Stay safe and connected while driving by installing an Axxess connectivity interface and mobility products.
Digital Signal Processor
Upgrade your sound, keep your factory radio and retain your functions with our versatile digital signal processor.
Override Engine's STOP/START
Override Interface for Ford, Chrysler, Dodge, & Jeep®. Simple install to override or re-engage the stop engine feature!
Back to news

Axxess® Ships Two New Interfaces Designed to Fit Newer Ford SUVs, Vans, and Trucks

Jun 23, 2021

Holly Hill, FL  – Axxess® by Metra Electronics® has two new data interfaces designed to fit Ford’s 2020-up* EcoSport, Escape, Transit, Transit Connect, and F-250, F-350, F-450 and F-550 trucks. The interfaces also fit Ford’s 2021-up* E-Series van, also known as the Econoline. Both of the interfaces, the AXTC-FD3 and AXVI-FD3, retain key features and are used when replacing the factory radio. Both provide NAV outputs, accessory power, and a 12-volt illumination output, in addition to retaining R.A.P., balance, and fade. The main difference is that the AXTC-FD3 has a built-in AXSWC steering wheel control interface while the AXVI-FD3 does not (it has a pre-wired harness for the AXSWC, which is sold separately). This makes the AXVI-FD3 an ideal choice for models that do not have audio controls on the steering wheel.


AXTC-FD3 Interface

The Total Control™ Series combines a data interface with all of the features of the patented** Axxess steering wheel control interface (AXSWC) for one convenient solution. When replacing a radio, the interface utilizes patented Auto-Detect technology that automatically detects the vehicle type, radio connection, and preset controls, while allowing the ability to dual assign steering wheel controls. This interface is designed to work with all major radio brands and both amplified and non-amplified audio systems. In addition to Auto-Detect, it can be manually programmed for most vehicles and will retain settings even after battery disconnection or interface removal. Vehicle-specific harnessing makes installation even easier.

AXTC-FD3 Product Specifications:

  • Data and SWC interface with vehicle-specific harnessing
  • Provides accessory power (12-volt 10-amp)
  • Provides wires for NAV outputs for multimedia radios (parking brake, reverse, speed sense)
  • Retains audio controls on steering control
  • Retains balance and fade
  • Retains R.A.P. (Retained Accessory Power)
  • Designed for non-amplified models only
  • Designed to be compatible with all major radio brands
  • Auto detects vehicle type, radio connection, and preset controls
  • Ability to dual assign steering wheel control buttons
  • Retains memory settings even after battery disconnection or interface removal (non-volatile memory)
  • Provides illumination output
  • Micro “B” USB updatable


AXVI-FD3 Interface

For models that do not require retaining audio controls on the steering wheel, the AXVI-FD3 is another option for installers to retain key features.

AXVI-FD3 Product Specifications:

  • Data interface with vehicle-specific harnessing
  • Provides accessory power (12-volt 10-amp)
  • Retains R.A.P. (Retained Accessory Power)
  • Provides illumination output
  • Provides wires for NAV outputs for multimedia radios (parking brake, reverse, speed sense)
  • Pre-wired AXSWC harness (AXSWC sold separately)
  • Retains balance and fade
  • Designed for non-amplified models only
  • Micro “B” USB updatable

Both interfaces do not retain SYNC®, and are designed to fit the following non-amplified Ford models:

  • E-Series 2021-up*
  • EcoSport 2020-up*
  • Escape 2020-up*
  • F-250/F-350/F-450/F-550 2020-up*
  • Transit 2020-up*
  • Transit Connect 2020-up*

These solutions are both in stock now and will be covered in Metra’s advanced integration training session at KnowledgeFest™ in Orlando on June 27 at 10:30 AM. *See the vehicle application guide at for up-to-date, vehicle specific information. **The AXTC-FD3 utilizes U.S. patent number 8257147.

About Metra Electronics®

At Metra, 12volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world.  We actively listen to our customers’ requests and invest resources in developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 75+ years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp®, Metra Marine® and Daytona Lights®. Metra’s expertise in connectivity solutions is also applied to its division of premium AV and surveillance products from MetraAV®. For ordering information and pricing, visit Metra Electronics online at or call 386-257-2956.